This is Part 2 of a series on SAR and EMA mesh radio SOPs, built on field guidance from Kenny Cornett at Appalachiastan Technologies (AT-Labs). Part 1 covered the four rules for deploying LoRa mesh in the first place. This one covers what happens after the radios are on — how that position data actually becomes a common operating picture your command post and field teams can use.
Catch up on Part 1 — Four Rules for Deploying LoRa Mesh in Emergency Management if you haven't already.
If you found this helpful or interesting, consider picking up one of the ultra-rugged radios made by Appalachiastan Technologies on our store — browse the AT-Labs radio lineup.
Are you part of a government or volunteer SAR or EMA organization? You can apply for grant funding through our Funding Reach portal.
"Found Them." "Great — Where?"
That's the call every SAR operation is running toward. It's also where things used to slow down.
For most of SAR's history, answering "where" cost time nobody had. You triangulate off a landmark that's hard to describe over static. You read a GPS grid off a handheld, digit by digit, and wait for the other end to read it back so you know they copied it right. Radio traffic isn't a text thread — nobody can scroll up to double-check what you said. Every detail has to be spoken, heard correctly, and confirmed before it's actually useful: a coordinate, a landmark, a sign that the person you're looking for came through here twenty minutes ago. That takes time, and time is the one thing you can't get back once someone's hurt, the weather's turning, or daylight's running out.
Picture This:
Now instead of doing any of that, you alert the team, and they already know where you are. That's the benefit of a Common Operating Picture, aka a COP.
That's the real payoff of LoRa mesh in a SAR context, and it's bigger than any one radio call. A live COP means command isn't waiting on position reports at all — they're watching the search build in real time. Where teams have been. What ground is already covered. Where the gaps are. Where the next resource needs to go, and when. None of that requires anyone to key up a mic. That passive monitoring is key — because if a first responder gets off course, lost, or worse, injured, command knows exactly where they are and where to send help, instead of dealing with a second search and rescue operation.
Getting there means understanding how mesh-fed PLI actually reaches a map — because the three platforms EMA planners ask about most, ATAK, CalTopo, and ESRI, get you there in three very different ways.
ATAK: The Strongest Fit at the Field Level
ATAK — Android Team Awareness Kit — started as a military tool. The Air Force Research Laboratory built it for battlefield situational awareness: shared maps, real-time positions, coordination without waiting on a radio call. It's since spread well past that original use case — law enforcement, emergency management, and SAR teams now run the same software (often under the civilian-facing name CivTAK) for the same reason the military adopted it: everyone's position, on one map, in real time.
That heritage is also why ATAK is the platform that maps most naturally onto LoRa mesh, and the reason is architectural, not incidental. ATAK runs on Cursor on Target — COT — a data standard for passing position and situational awareness between clients. On a normal network that traffic runs through a TAK server over IP. On a mesh, it runs peer-to-peer, client to client, over the radios themselves. No server. No cellular. No IP infrastructure of any kind.
That means in a fully infrastructure-denied environment — no cell, no WiFi, no repeaters — field operators running ATAK over LoRa mesh can still see each other on the map. Position reports move device to device across the mesh. Short coordination messages move the same way. The picture stays live for everyone on the mesh regardless of what the rest of the world's infrastructure is doing.
What you don't get is the full TAK server experience* — attachments, data packages, and anything that depends on a live server connection aren't part of the peer-to-peer picture. What you do get — live position and short message traffic between field operators with zero supporting infrastructure — is exactly what matters most when the infrastructure is the thing that's gone.
If you're new to ATAK or need a refresher on getting it stood up, our ATAK Quick-Start Guide walks through the setup from scratch.
*Unless you have a handy way of hauling a server out into the field with you... (that's a tease, if you didn't catch that).
CalTopo: Command Sees the Field — Almost

CalTopo is widely used across search and rescue, and for good reason — its terrain analysis and SAR-specific planning tools are hard to beat when ground truth matters as much as where your people are standing on it.
The catch is architectural, not situational. CalTopo's shared map lives on a web server. A field operator trying to pull that map up on their phone needs a connection to CalTopo's server — which means cellular. In a fully infrastructure-denied environment, that connection is gone, and with it the field team's ability to see the picture command is looking at. Command sees the field. The field doesn't see the picture. That's not a knock on CalTopo — it's how the platform is built, and for command post use it's still an excellent tool.
Bringing LoRa mesh into CalTopo in a bigger way is something we're working toward. We'll have more to announce on that soon — if you want to be first to know, get in touch and we'll keep you posted.
ESRI: The Institutional Layer
If you don't work inside an EOC, there's a decent chance you've never heard of ESRI — but if you do, it's probably already part of your day job. ESRI is the company behind ArcGIS, the geographic information system most county and state emergency management agencies already run for mapping, planning, and incident documentation. It's not a mobile-first tool the way ATAK and CalTopo are; it's the institutional backbone a lot of EOCs are already built on, with trained staff and workflows already set up around it. One real advantage of an ESRI-based system: it's accessible from any web browser, no dedicated app or device required, which makes it easy to put a shared picture in front of stakeholders who aren't in the field or running ATAK.
That entrenchment is exactly why it's worth covering here, and why it's the most institutionally common COP platform in this space even though it's the least LoRa-native. Direct mesh integration with ESRI isn't a documented or common practice today; the platform's architecture is heavily server-dependent, and real-time PLI in a fully infrastructure-denied environment isn't currently a strength of it.
For agencies with existing ESRI investment, the practical move is to treat it as the planning and documentation layer rather than the real-time one — where incident data gets captured, analyzed, and archived — while ATAK or CalTopo handle real-time field operations. PLI captured through either one can feed into ESRI afterward, or whenever connectivity allows. It's not a seamless pipeline, but it's an honest one, and it plays to what each platform is actually good at.
ESRI isn't the only planning-layer software in this conversation, and it won't be the last one we cover — we've got more coming on some newer, purpose-built command-and-control options built specifically around this kind of mesh integration. More on that soon.
Wrapping Up
Common operating picture software is increasingly becoming the standard in this space, and it's earned that — it's proven itself invaluable regardless of which platform a given agency ends up running. Whichever one fits your operation, the outcome is the same: a more efficient and safer department.
Coming Up Next
This series continues with a closer look at what LoRa mesh actually is and isn't underneath the marketing language, then a deep dive on choosing between Meshtastic, MeshCore, and Reticulum for your operation's scale.
Working through the full series? Here's where to find the rest:
Found this useful? Follow us on Instagram, Facebook, and X — sharing these guides goes a long way.