{"title":"Radios","description":"Mesh and MANET radios, plus programmed ham radios for prepared civilians. From the AT-Labs \u003ca href=\"\/products\/rm-1-ruggedized-mesh-radio\"\u003eRM-1\u003c\/a\u003e and \u003ca href=\"\/products\/rm-2-ruggedized-mesh-radio\"\u003eRM-2\u003c\/a\u003e rugged mesh radios and the \u003ca href=\"\/products\/nucleus-v3\"\u003eNucleus MANET radio\u003c\/a\u003e to Meshtastic nodes and TAK server hardware, this is off-grid comms built to keep working when cell towers and repeaters don't — no subscription required.","products":[{"product_id":"uv-5r-starter-bundle","title":"UV-5R Upgrade Kit","description":"\u003cp\u003eOur Baofeng UV-5R upgrade kit has everything you need set up for an off-grid comms solution.\u003c\/p\u003e\n\u003cp\u003eEach radio is QC'd and programmed for you by our team, and is then upgraded with an extended battery and vastly improved antenna to maximize the range of your radio.\u003c\/p\u003e\n\u003cp\u003eProgramming includes all local repeaters in your area so you can reach out even further, as well as GMRS and NOAA Weather stations for monitoring only. By request we can also add local emergency services for monitoring.\u003c\/p\u003e\n\u003cp\u003eOnly need the radio programmed? The \u003cstrong\u003e\u003ca href=\"\/products\/custom-programmed-uv-5r\"\u003eCustom Programmed UV-5R\u003c\/a\u003e\u003c\/strong\u003e is the same setup with the stock battery and antenna.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUV-5R Transceiver\u003c\/li\u003e\n\u003cli\u003eNagoya Antenna\u003c\/li\u003e\n\u003cli\u003eExtended Battery\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/uv-5r-guard\"\u003eVigilante Engineering Knob Guard\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003eCharging Cable\u003c\/li\u003e\n\u003cli\u003eChannel Cheat Sheet - A guide on all programmed channels for your radio\u003c\/li\u003e\n\u003cli\u003eUser Manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePlease allow up to 1 week for programming and assembly.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003e\u003cstrong\u003eSpecs\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Range:\u003c\/strong\u003e 144–148 MHz (VHF) \/ 420–450 MHz (UHF) ham bands, GMRS (462–467 MHz), NOAA weather (162 MHz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Output:\u003c\/strong\u003e 4W \/ 1W (selectable high\/low)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChannels:\u003c\/strong\u003e 128\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery:\u003c\/strong\u003e 3800mAh Li-ion extended battery (BL-5 series) — more than double stock capacity\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAntenna:\u003c\/strong\u003e Upgraded Nagoya antenna for improved range over stock\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 9.2 oz with extended battery installed\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDo I need a license to use this radio?\u003c\/strong\u003e\u003cbr\u003eTo transmit, yes. You need an FCC amateur (ham) license, and the Technician license covers the ham channels this radio is programmed for. Listening is license-free. FCC rules recognize emergency communication when life or property is at immediate risk and no other means is available. We highly recommend users get a license though and conform to all local, state, and federal regulations that apply. An emergency exception isn't a comms plan. Compliance with local and federal rules is on the operator.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCan I use it on GMRS?\u003c\/strong\u003e\u003cbr\u003eWe program GMRS channels for monitoring, so you can hear GMRS traffic in your area. The UV-5R isn't type-accepted for GMRS, so day-to-day GMRS transmitting needs a GMRS-certified radio. In a genuine emergency, the UV-5R is capable of transmitting on GMRS frequencies however customers should see the license answer above. Licensing and compliance are on the operator.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat's different from the Custom Programmed UV-5R?\u003c\/strong\u003e\u003cbr\u003eSame custom programming, fuller loadout — this adds the extended battery, upgraded Nagoya antenna, and Vigilante Engineering knob guard on top.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat gets programmed onto my radio?\u003c\/strong\u003e\u003cbr\u003eWe program it for your area and work with you on what goes on it. We'll follow up by email with a recommended programming guide before anything's finalized.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHow long until it ships?\u003c\/strong\u003e\u003cbr\u003eUp to 1 week for programming and assembly.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Baofeng","offers":[{"title":"Default Title","offer_id":42101851553928,"sku":"","price":95.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/2116\/6472\/files\/BaoIMG_4765copy.jpg?v=1712769547"},{"product_id":"custom-programmed-uv-5r","title":"Custom Programmed UV-5R","description":"\u003cp\u003eThe Baofeng UV-5R is one of the most popular handheld ham radios in the country, and the most commonly left in a drawer. Out of the box, it's a blank radio with a menu system built to punish beginners. Ours shows up already programmed for where you live, so the first time you pick it up, it works.\u003c\/p\u003e\n\u003cp\u003eEach radio is QC'd and programmed for you by our team.\u003c\/p\u003e\n\u003cp\u003eProgramming includes all local repeaters in your area so you can reach out even further, as well as GMRS and NOAA Weather stations for monitoring only.\u003c\/p\u003e\n\u003cp\u003eWant more range and battery? The \u003cstrong\u003e\u003ca href=\"\/products\/uv-5r-starter-bundle\"\u003eUV-5R Upgrade Kit\u003c\/a\u003e\u003c\/strong\u003e is the same programming with an extended battery, a Nagoya antenna, and a Vigilante Engineering controls guard.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 UV-5R Transceiver\u003c\/li\u003e\n\u003cli\u003eStandard Antenna\u003c\/li\u003e\n\u003cli\u003eStandard Battery\u003c\/li\u003e\n\u003cli\u003eCharging Cradle\u003c\/li\u003e\n\u003cli\u003eChannel Cheat Sheet - A guide on all programmed channels for your radio\u003c\/li\u003e\n\u003cli\u003eUser Manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePlease allow up to 1 week for programming and assembly.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003e\u003cstrong\u003eSpecs\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Range:\u003c\/strong\u003e 144–148 MHz (VHF) \/ 420–450 MHz (UHF) ham bands, GMRS (462–467 MHz), NOAA weather (162 MHz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Output:\u003c\/strong\u003e 4W \/ 1W (selectable high\/low)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChannels:\u003c\/strong\u003e 128\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery:\u003c\/strong\u003e 1800mAh Li-ion (standard)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 7.2 oz (204g)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDo I need a license to use this radio?\u003c\/strong\u003e\u003cbr\u003eTo transmit, yes. You need an FCC amateur (ham) license, and the Technician license covers the ham channels this radio is programmed for. Listening is license-free. FCC rules recognize emergency communication when life or property is at immediate risk and no other means is available. We highly recommend users get a license though and conform to all local, state, and federal regulations that apply. An emergency exception isn't a comms plan. Compliance with local and federal rules is on the operator.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCan I use it on GMRS?\u003c\/strong\u003e\u003cbr\u003eWe program GMRS channels for monitoring, so you can hear GMRS traffic in your area. The UV-5R isn't type-accepted for GMRS, so day-to-day GMRS transmitting needs a GMRS-certified radio. In a genuine emergency, the UV-5R is capable of transmitting on GMRS frequencies however customers should see the license answer above. Licensing and compliance are on the operator.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIs this a good first ham radio?\u003c\/strong\u003e\u003cbr\u003eYes. It's the radio most new operators start on, and the one most likely to get set aside because programming it is a chore. We remove that step.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat gets programmed onto my radio?\u003c\/strong\u003e\u003cbr\u003eWe program it for your area — local repeaters and NOAA weather stations for monitoring. We'll follow up by email with a recommended programming guide before anything's finalized, so you can weigh in on what goes on your radio.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCan I get local emergency services channels added?\u003c\/strong\u003e\u003cbr\u003eBy request — reach out and we'll add them for monitoring.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHow long until it ships?\u003c\/strong\u003e\u003cbr\u003eUp to 1 week for programming and assembly.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Baofeng","offers":[{"title":"Default Title","offer_id":42141557653640,"sku":"","price":44.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/2116\/6472\/files\/IMG_4787copy.jpg?v=1713119499"},{"product_id":"rm-1-ruggedized-mesh-radio","title":"RM-1 Ruggedized Mesh Radio","description":"\u003ch4\u003e\u003cstrong\u003eNEW: Every RM-1 now ships standard with the RC-1 Quick Charge Adapter — full charge in about 3 hours, no separate purchase needed.\u003c\/strong\u003e\u003c\/h4\u003e\n\u003chr\u003e\n\u003ch4\u003e\u003cstrong\u003eThis is a Made-to-Order Item. We currently expect units to ship from AT-Labs within 8 weeks of an order being placed.\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eBulk orders - please contact us for more accurate lead times.\u003c\/p\u003e\n\n\u003chr\u003e\n\n\u003cp\u003eThe RM-1 is a rugged 1-watt Meshtastic mesh radio from AT-Labs, built in Tennessee for search and rescue teams, first responders, and prepared civilians. It runs Meshtastic, MeshCore, and Reticulum with no subscription, fits a standard radio pouch, and runs for days on one charge.\u003c\/p\u003e\n\u003cp\u003eThe RM-1 family of devices provides ad-hoc mesh data networking capabilities for austere environments. Designed and built in America, this Meshtastic radio is ready to perform in the most challenging conditions.\u003c\/p\u003e\n\u003cp\u003ePurpose-built specifically for the needs of first responders, remote\/austere workers, utility workers, and concerned citizens, the RM-1 delivers robust connectivity when you need it most.\u003c\/p\u003e\n\u003cp\u003eThe RM-1 Family of radios is proudly designed and built in Tennessee. Tested and proven during the recovery efforts after Hurricane Helene, these radios established a track record as an invaluable asset to bridge communication gaps left by the destruction.\u003c\/p\u003e\n\u003cp\u003eFitting snug in a standard radio pouch, the RM-1 integrates with standard military and emergency responder gear. The all-aluminum housings of the RM-1 radios ensure extreme protection of the internal components in the most austere of environments. A large battery and optimized antenna for Meshtastic ensure maximum range and battery life in the field. Unlike most Meshtastic radios on the market, the RM-1 boasts a custom board that gives the user a true, filtered 1 watt of power - the maximum legal limit for unlicensed, encrypted comms.\u003c\/p\u003e\n\u003cp\u003eThe RM-1 comes standard with the Meshtastic protocol for license-free encrypted messaging and data. This means they will inter-operate with any meshtastic nodes in your area, boosting their range and capability. Community-supported ATAK plugins extend this radio's capability to emergency and tactical roles.\u003c\/p\u003e\n\u003cp\u003eThe RM-1 also supports Meshcore.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe RM-1 comes in two variants:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEach of the RM-1 variants is based on a common rugged housing, battery system, and base radio support options.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePortable:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis variant is designed to be worn or carried by individuals in the field. The ruggedized aluminum housing is built for survivability in the most demanding conditions (IP-68 rating pending). Its large 10,000mAH battery can keep a unit running for as long as 8-10 days in the field between charges.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInfrastructure:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis variant is designed to be mounted as a repeater. It includes mounting brackets and a solar panel - ideal for quick deployment with minimal maintenance. It retains the portable's large battery and high transmit power, but combined with the solar panel, it can run indefinitely in the field without the need to manually charge it - depending on conditions.\u003c\/p\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003e\u003cstrong\u003eWhy we love it:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIP-68 and MIL-STD-810H ratings pending\u003c\/li\u003e\n\u003cli\u003eSupports Meshtastic, Reticulum and Meshcore\u003c\/li\u003e\n\u003cli\u003eMeshtastic encrypted messaging, up to 50 miles of range\u003c\/li\u003e\n\u003cli\u003eHardened and tuned antenna - no need to upgrade your antenna like most radios\u003c\/li\u003e\n\u003cli\u003eDesigned and built in America - field tested and proven in disaster relief efforts\u003c\/li\u003e\n\u003cli\u003ePortable variant fits in a standard radio pouch for maximum compatibility on kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat's the difference between the RM-1 and RM-2?\u003c\/strong\u003e\u003cbr\u003eThe RM-1 is a 1-watt LoRa radio. The \u003ca href=\"\/products\/rm-2-ruggedized-mesh-radio\"\u003eRM-2\u003c\/a\u003e is a 2-watt version of that.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePortable or Infrastructure — which one do I need?\u003c\/strong\u003e\u003cbr\u003ePortable is worn or carried and built for individual field use. Infrastructure is a fixed repeater with mounting brackets and a solar panel, meant to run unattended and extend your team's coverage. Most teams start with a mix: portables for personnel, infrastructure for fixed high points.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDo I need a license to operate the RM-1?\u003c\/strong\u003e\u003cbr\u003eNo. The RM-1 transmits at 1W of filtered LoRa power — the maximum legal limit for unlicensed, encrypted Meshtastic communications. No callsign, no FCC paperwork.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat range should I actually expect in the field?\u003c\/strong\u003e\u003cbr\u003eUp to 50 miles is achievable, but that's line-of-sight, favorable terrain. Real-world range depends on obstruction, node density, and antenna placement — mesh gets stronger as you add nodes, since every radio repeats the signal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWill the RM-1 talk to RM-2 radios on the same mesh?\u003c\/strong\u003e\u003cbr\u003eYes — on Meshtastic, MeshCore, or Reticulum, as long as both radios are running the same core firmware.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIs this the right radio for a SAR team?\u003c\/strong\u003e\u003cbr\u003eYes—when you need a pouch-compatible LoRa mesh node with days of battery, open firmware (Meshtastic \/ MeshCore \/ Reticulum), and US-assembled hardware you can hand to volunteers without a subscription. Match power to licensing: RM-1 for legal 1W unlicensed encrypted mesh; RM-2 when you need 2W under Part 97 rules.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHow is this different from a $30 Meshtastic board?\u003c\/strong\u003e\u003cbr\u003eA $30 board is a starter node. These are duty radios: filtered power, aluminum housing that fits standard radio pouches, ~10 Ah battery for multi-day missions, and an ~8-week made-to-order build. Same open mesh idea; different job.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003e\u003cstrong\u003eFeature List\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAll aluminum housing with rubber bumpers - IP-68 and MIL-STD 810H ratings pending\u003c\/li\u003e\n\u003cli\u003eCustom LoRA board delivering best-in-class performance\u003c\/li\u003e\n\u003cli\u003eConnectivity:\n\u003cul\u003e\n\u003cli\u003eTuned, durable LoRA antenna\u003c\/li\u003e\n\u003cli\u003eActive helical GNSS antenna on portable nodes means reliable location info no matter the device orientation\u003c\/li\u003e\n\u003cli\u003eExternal BT antenna on Infrastructure Variant\u003c\/li\u003e\n\u003cli\u003eBlueTooth to EUD or use waterproof USB-C Cable (included with portable)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eWaterproof USB-C Port\n\u003cul\u003e\n\u003cli\u003e10AHr battery for extended life:\n\u003cul\u003e\n\u003cli\u003e5-15 days for portable and\u003c\/li\u003e\n\u003cli\u003eUp to 30 for infrastructure (radio and GPS configuration dependent)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eStainless steel mounting bracket and solar supports on infrastructure node are designed to withstand 100mph winds\u003c\/li\u003e\n\u003cli\u003eCharging pogo pads on case bottom — now shipping standard with the RC-1 Quick Charge Adapter\u003c\/li\u003e\n\u003cli\u003ePhysical On\/Off Switch\u003c\/li\u003e\n\u003cli\u003eOperating Temperatures\n\u003cul\u003e\n\u003cli\u003eCharge 0～45℃\u003c\/li\u003e\n\u003cli\u003eDischarge –20～60℃\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\n\n\u003ch4\u003e\u003cstrong\u003e!!!SPECIAL NOTICE!!!\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eNote: IP-68 and MIL-STD-810H certifications for the RM-1 are pending. Product specifications are subject to modification pending final certification outcomes.\u003c\/p\u003e\n\u003cp\u003ePerformance Disclaimer: Battery life, range, and operational reliability may vary based on environmental conditions, including but not limited to temperature, weather, and surrounding terrain. The stated performance metrics represent optimal conditions and may not be achievable in all use cases.\u003c\/p\u003e","brand":"AT-Labs","offers":[{"title":"Portable","offer_id":42989845086344,"sku":"","price":545.0,"currency_code":"USD","in_stock":true},{"title":"Infrastructure","offer_id":42989846298760,"sku":"","price":595.0,"currency_code":"USD","in_stock":true},{"title":"Infrastructure with Upgraded Antenna","offer_id":43276367200392,"sku":"","price":620.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/2116\/6472\/files\/IMG_6971.jpg?v=1770653170"},{"product_id":"uv-5r-guard","title":"UV-5R Guard","description":"\u003cp\u003eThe UV-5R Guard from Vigilante Engineering is the coolest thing to happen to the Baofeng radio since Part 97 was regulated. This guard does three things: Protects the volume knob from negligent adjustments, covers the \"shoot me\" light on top of the radio, improving light discipline, and gives a (small) bit of extra support to the antenna - all while keeping the profile of the radio low and sleek.\u003c\/p\u003e\n\u003cp\u003eIt's a cheap but highly effective upgrade. These will come standard on our UV-5R upgrade kits, but you can also buy them a-la-cart here.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003e\u003cstrong\u003eWhy We Love It\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eProtects your volume knob from negligent adjustments while worn on kit\u003c\/li\u003e\n\u003cli\u003eCovers the \"Shoot Me\" Light on top of the radio - reducing accidental light signature\u003c\/li\u003e\n\u003cli\u003eEasy to install - Just two screws on the back of the radio\u003c\/li\u003e\n\u003cli\u003eDesigned and Made in America\u003c\/li\u003e\n\u003cli\u003eExtremely Stylish and Sophisticated - Radio guards: So hot right now\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003e\u003cstrong\u003eSpecs\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e UV-stable thermoplastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 2\" W x 1 1\/16\" L x 1 1\/16\" H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.2 oz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFit:\u003c\/strong\u003e Sized for the standard Baofeng UV-5R\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstall:\u003c\/strong\u003e Two screws, no tools beyond a small screwdriver\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhich radios does this fit?\u003c\/strong\u003e\u003cbr\u003eThe standard Baofeng UV-5R — that's what our upgrade kits ship with, and what it's sized for.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHow do I install it?\u003c\/strong\u003e\u003cbr\u003eTwo screws on the back of the radio. No tools beyond a small screwdriver.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat does it actually protect?\u003c\/strong\u003e\u003cbr\u003eYour volume knob from getting bumped while worn on kit, the \"shoot me\" indicator light on top, and gives the antenna a bit of extra support — all without adding bulk.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIs it made in the USA?\u003c\/strong\u003e\u003cbr\u003eYes — designed and made in America.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWant the full loadout? The \u003cstrong\u003e\u003ca href=\"\/products\/uv-5r-starter-bundle\"\u003eUV-5R Upgrade Kit\u003c\/a\u003e\u003c\/strong\u003e ships with this guard installed, plus an extended battery, a Nagoya antenna, and programming for your area.\u003c\/p\u003e","brand":"Vigilante Engineering","offers":[{"title":"Default Title","offer_id":43184274768008,"sku":"","price":6.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/2116\/6472\/files\/IMG_7189.jpg?v=1735498901"},{"product_id":"trekker-bravo","title":"Trekker Bravo","description":"\u003ch5 data-end=\"913\" data-start=\"308\"\u003eUsually Ships in 5-8 business Days\u003c\/h5\u003e\n\u003cp data-end=\"913\" data-start=\"308\"\u003eThe Spec5 Trekker BRAVO is a compact, Meshtastic-enabled radio designed for hikers, preppers, and anyone who wants to stay connected when the grid goes down. It works right out of the box and communicates with any other Meshtastic node—no license, no subscription, no cellular infrastructure. Whether you’re moving through the backcountry or coordinating with your team during an emergency, the Trekker BRAVO keeps the messages flowing. It also integrates with ATAK for real-time situational awareness—and if you're not sure how to set that up, we’ve got a simple\u003ca href=\"https:\/\/constellationresponse.com\/blogs\/news\/atak-quick-start-guide-pt1\" target=\"_blank\" rel=\"noopener\"\u003e guide \u003c\/a\u003eon our site to walk you through it.\u003c\/p\u003e\n\u003cp data-end=\"1231\" data-start=\"915\"\u003eBuilt in Texas, the Trekker BRAVO comes with a Gizont external antenna to improve range and performance, and a clever flip stand that makes it easy to deploy on a flat surface when it’s not clipped to your gear. With 8 hours of runtime under constant use, it’s made for all-day missions and spontaneous coordination.\u003c\/p\u003e\n\u003cp data-end=\"1410\" data-start=\"1233\"\u003eWhether you're using it as a backpack node, a static relay point, or your go-to link in a local mesh, the BRAVO is a versatile tool for building resilience into your comms plan.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003chr data-end=\"1415\" data-start=\"1412\"\u003e\n\u003ch3 data-end=\"1437\" data-start=\"1417\"\u003e\u003cbr\u003e\u003c\/h3\u003e\n\u003ch3 data-end=\"1437\" data-start=\"1417\"\u003e\u003cstrong data-end=\"1435\" data-start=\"1417\"\u003eWhy We Love It\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul data-end=\"1650\" data-start=\"1438\"\u003e\n\u003cli data-end=\"1492\" data-start=\"1438\"\u003e\n\u003ch4 data-end=\"1492\" data-start=\"1440\"\u003eIntegrates with ATAK—learn how with our free guide\u003c\/h4\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"1532\" data-start=\"1493\"\u003e\n\u003ch4 data-end=\"1532\" data-start=\"1495\"\u003eNo license or subscription required\u003c\/h4\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"1583\" data-start=\"1533\"\u003e\n\u003ch4 data-end=\"1583\" data-start=\"1535\"\u003eBuilt in Texas and ready to use out of the box\u003c\/h4\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"1650\" data-start=\"1584\"\u003e\n\u003ch4 data-end=\"1650\" data-start=\"1586\"\u003eExternal Gizont antenna + flip stand = easy to deploy anywhere\u003c\/h4\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\u003ch3\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDo I need a license or subscription to run this?\u003c\/strong\u003e\u003cbr\u003eNo. It's a standard Meshtastic node — license-free, subscription-free, and encrypted out of the box.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat range should I actually expect?\u003c\/strong\u003e\u003cbr\u003eRoughly 1–3 miles urban, 3–5 miles rural, line-of-sight and terrain dependent. Range grows as you add more nodes to your mesh — every node repeats the signal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHow long does the battery last?\u003c\/strong\u003e\u003cbr\u003e8 hours active, 24 hours standby, on a single 18650 cell. Charges over USB-C.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWill it work with my RM-1 or RM-2?\u003c\/strong\u003e\u003cbr\u003eYes. It runs standard Meshtastic, so it talks to AT-Labs radios and any other Meshtastic node on your channel.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e \u003cmeta charset=\"utf-8\"\u003e\n\u003ctable style=\"width: 100.091%;\"\u003e\n\u003ccaption\u003eOverview\u003c\/caption\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth style=\"width: 41.6109%;\"\u003eCase Material\u003c\/th\u003e\n\u003ctd style=\"width: 58.2059%;\"\u003ePETG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"width: 41.6109%;\"\u003eDIMMS\u003c\/th\u003e\n\u003ctd style=\"width: 58.2059%;\"\u003e50 x 140 x 40 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"width: 41.6109%;\"\u003eWeight\u003c\/th\u003e\n\u003ctd style=\"width: 58.2059%;\"\u003e165g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ctable style=\"width: 100.091%; height: 78.3752px;\"\u003e\n\u003ccaption\u003eHardware\u003c\/caption\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003cth style=\"width: 40.8345%; height: 19.5938px;\"\u003eMCU\u003c\/th\u003e\n\u003ctd style=\"width: 58.7992%; height: 19.5938px;\"\u003eESP32\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003cth style=\"width: 40.8345%; height: 19.5938px;\"\u003eLORA Node Chip\u003c\/th\u003e\n\u003ctd style=\"width: 58.7992%; height: 19.5938px;\"\u003eSX1262\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003cth style=\"width: 40.8345%; height: 19.5938px;\"\u003ePSRAM\u003c\/th\u003e\n\u003ctd style=\"width: 58.7992%; height: 19.5938px;\"\u003e512 KB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003cth style=\"width: 40.8345%; height: 19.5938px;\"\u003eFLASH\u003c\/th\u003e\n\u003ctd style=\"width: 58.7992%; height: 19.5938px;\"\u003e384 KB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ctable style=\"width: 100.091%;\"\u003e\n\u003ccaption\u003ePower \u0026amp; Battery\u003c\/caption\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth style=\"width: 41.2844%;\"\u003eBattery\u003c\/th\u003e\n\u003ctd style=\"width: 58.3493%;\"\u003e1 x 18650\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"width: 41.2844%;\"\u003eBattery Life\u003c\/th\u003e\n\u003ctd style=\"width: 58.3493%;\"\u003e8 Hours Active \/ 24 Hours Standby\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"width: 41.2844%;\"\u003eCharging\u003c\/th\u003e\n\u003ctd style=\"width: 58.3493%;\"\u003eUSB-C 5 Volt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"width: 41.2844%;\"\u003eSolar Charging\u003c\/th\u003e\n\u003ctd style=\"width: 58.3493%;\"\u003eNA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ctable style=\"width: 100.091%;\"\u003e\n\u003ccaption\u003eConnectivity\u003c\/caption\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth style=\"width: 41.0356%;\"\u003eAntenna\u003c\/th\u003e\n\u003ctd style=\"width: 58.5981%;\"\u003e915 MHz LoRa Antenna GPS Ceramic Antenna\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"width: 41.0356%;\"\u003eFrequency\u003c\/th\u003e\n\u003ctd style=\"width: 58.5981%;\"\u003e915 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"width: 41.0356%;\"\u003eUrban Range\u003c\/th\u003e\n\u003ctd style=\"width: 58.5981%;\"\u003e~1-3 Miles\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"width: 41.0356%;\"\u003eRural Range\u003c\/th\u003e\n\u003ctd style=\"width: 58.5981%;\"\u003e~3–5 Miles\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Spec5","offers":[{"title":"Desert Sand","offer_id":43784911224968,"sku":"","price":120.0,"currency_code":"USD","in_stock":true},{"title":"Spec5 Green","offer_id":43784911257736,"sku":"","price":120.0,"currency_code":"USD","in_stock":true},{"title":"Tactical Green","offer_id":43784911290504,"sku":"","price":120.0,"currency_code":"USD","in_stock":true},{"title":"Black","offer_id":43784911323272,"sku":"","price":120.0,"currency_code":"USD","in_stock":true},{"title":"White","offer_id":43784911356040,"sku":"","price":120.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/2116\/6472\/files\/Frame_49_7890065e-7303-44ec-8272-758b1ccef05b.webp?v=1750699909"},{"product_id":"minitrekker","title":"MiniTrekker","description":"\u003ch5 data-end=\"913\" data-start=\"308\"\u003eUsually Ships in 5-8 business Days\u003c\/h5\u003e\n\u003cp data-pm-slice=\"1 3 []\"\u003e\u003cspan\u003eThe Spec5 MiniTrekker is the smallest Meshtastic-enabled node we’ve ever carried. Just a little larger than a car key fob, it’s designed to ride unnoticed in your pocket, clipped to your keychain, or stashed in a pouch as a low-profile backup. Despite its size, it still delivers 3–6 hours of battery life and full compatibility with every other Meshtastic node on the network. Like all Meshtastic nodes, it’s license-free, subscription-free, and encrypted by default. And yes—it integrates with ATAK. If you're not sure how to set that up, we’ve got \u003ca href=\"https:\/\/constellationresponse.com\/blogs\/news\/atak-quick-start-guide-pt1\" target=\"_blank\" rel=\"noopener\"\u003ea step-by-step guide\u003c\/a\u003e on our site to help.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe MiniTrekker trades range for portability. Opting-out of an external antenna means its signal strength is more limited than larger nodes like the Bravo—but in a supported mesh environment, it still performs reliably. That makes it ideal as a companion node: something you keep on you at all times, so you’re never out of touch when it counts.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis isn’t your primary relay node—it’s your EDC option. Lightweight, discreet, and always ready.\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003chr\u003e\u003c\/div\u003e\n\u003ch3\u003e\u003cspan\u003e\u003cstrong\u003eWhy We Love It\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul data-spread=\"false\"\u003e\n\u003cli\u003e\n\u003ch4\u003e\u003cspan\u003eFits on your keychain—always have a node on you\u003c\/span\u003e\u003c\/h4\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ch4\u003e\u003cspan\u003e3–6 hours of battery life despite its size\u003c\/span\u003e\u003c\/h4\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ch4\u003e\u003cspan\u003eWorks with all Meshtastic nodes and integrates with\u003ca href=\"https:\/\/constellationresponse.com\/blogs\/news\/atak-quick-start-guide-pt1\" target=\"_blank\" rel=\"noopener\"\u003e ATAK\u003c\/a\u003e\u003c\/span\u003e\u003c\/h4\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ch4\u003e\u003cspan\u003ePerfect backup or companion node for mesh-supported environments\u003c\/span\u003e\u003c\/h4\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\u003ch3\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDo I need a license or subscription?\u003c\/strong\u003e\u003cbr\u003eNo — same as every Meshtastic node: license-free, subscription-free, encrypted by default.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHow long does the battery last?\u003c\/strong\u003e\u003cbr\u003e3–6 hours active, charges over USB-C like the rest of the Spec5 lineup.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes it lose range compared to the Trekker Bravo?\u003c\/strong\u003e\u003cbr\u003eYes. No external antenna means weaker signal strength on its own — it's built to lean on a supported mesh, not to be the long-range node.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIs this meant to be my primary radio?\u003c\/strong\u003e\u003cbr\u003eNo — it's an EDC backup, not a primary relay. Keep a Bravo or RM-series radio as your main node and carry this as the one you always have on you.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWill it talk to my other Meshtastic radios?\u003c\/strong\u003e\u003cbr\u003eYes — standard Meshtastic protocol, fully compatible with Trekker Bravo, RM-1, RM-2, and any other Meshtastic node.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Spec5","offers":[{"title":"Desert Sand","offer_id":43785165340808,"sku":"","price":70.0,"currency_code":"USD","in_stock":true},{"title":"Spec5 Green","offer_id":43785165373576,"sku":"","price":70.0,"currency_code":"USD","in_stock":true},{"title":"Tactical Green","offer_id":43785165406344,"sku":"","price":70.0,"currency_code":"USD","in_stock":true},{"title":"Black","offer_id":43785165439112,"sku":"","price":70.0,"currency_code":"USD","in_stock":true},{"title":"White","offer_id":43785165471880,"sku":"","price":70.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/2116\/6472\/files\/Frame_1_7eba4640-c79f-4db4-84f8-de9cd20d0206.webp?v=1750702175"},{"product_id":"copilot","title":"Copilot","description":"\u003ch5 data-start=\"308\" data-end=\"913\"\u003eUsually Ships in 5-8 business Days\u003c\/h5\u003e\n\u003cp data-start=\"245\" data-end=\"728\"\u003eThe Spec5 Copilot is a purpose-built Meshtastic node designed to ride on drones and extend your mesh network vertically. With dual antennas oriented both upward and downward, the Copilot is optimized to maximize coverage from altitude—giving you better comms in rough terrain, over long distances, or across large search areas. Whether you're running a DJI camera drone or an FPV platform like the Hourglass, the adjustable strap system mounts securely and quickly to most airframes.\u003c\/p\u003e\n\u003cp data-start=\"730\" data-end=\"1189\"\u003eWith a 6–8 hour battery life, the Copilot is ideal for continuous flight rotations or static overwatch when paired with tethered or long-endurance drones. It functions like any other Meshtastic node—fully encrypted, no license or subscription required, and 100% compatible with your ground-based radios.\u003c\/p\u003e\n\u003cp data-start=\"730\" data-end=\"1189\"\u003eAnd yes, it integrates with ATAK for real-time position tracking and situational awareness. Need help setting that up? Our \u003ca href=\"https:\/\/constellationresponse.com\/blogs\/news\/atak-quick-start-guide-pt1\" rel=\"noopener\" target=\"_blank\"\u003eATAK guide\u003c\/a\u003e walks you through it.\u003c\/p\u003e\n\u003cp data-start=\"1191\" data-end=\"1379\"\u003eThis is the piece you deploy when your line-of-sight goes vertical. For grid-down coverage, aerial overwatch, or dynamic comms during a mission—Copilot gives your drone a job that matters.\u003cbr\u003e\u003cbr\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/p\u003e\n\u003ch3 data-start=\"1386\" data-end=\"1406\"\u003e\u003cstrong data-start=\"1386\" data-end=\"1404\"\u003eWhy We Love It\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul data-start=\"1407\" data-end=\"1654\"\u003e\n\u003cli data-start=\"1407\" data-end=\"1471\"\u003e\n\u003ch4 data-start=\"1409\" data-end=\"1471\"\u003eDual antenna setup boosts coverage up and down from altitude\u003c\/h4\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1472\" data-end=\"1529\"\u003e\n\u003ch4 data-start=\"1474\" data-end=\"1529\"\u003eMounts securely to most drones, including DJI and FPV\u003c\/h4\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1530\" data-end=\"1592\"\u003e\n\u003ch4 data-start=\"1532\" data-end=\"1592\"\u003e6–8 hours of battery life for all-day flights or rotations\u003c\/h4\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1593\" data-end=\"1654\"\u003e\n\u003ch4 data-start=\"1595\" data-end=\"1654\"\u003eATAK integration ready—check out our guide to get started\u003c\/h4\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\u003ch3\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDo I need a license or subscription?\u003c\/strong\u003e\u003cbr\u003eNo — standard Meshtastic, encrypted, license-free, no subscription.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat drones does it mount to?\u003c\/strong\u003e\u003cbr\u003eMost airframes. The adjustable strap system fits DJI camera drones and FPV platforms like the Hourglass without modification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHow long does it run in the air?\u003c\/strong\u003e\u003cbr\u003e6–8 hours on its own internal battery — enough for continuous flight rotations or static overwatch — independent of your drone's flight battery.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWill it work with my ground-based radios?\u003c\/strong\u003e\u003cbr\u003eYes — 100% compatible with RM-1, RM-2, Trekker Bravo, and any other Meshtastic node on the same channel.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Spec5","offers":[{"title":"Gray","offer_id":43785172844680,"sku":"","price":140.0,"currency_code":"USD","in_stock":true},{"title":"Tactical Green","offer_id":43785172877448,"sku":"","price":140.0,"currency_code":"USD","in_stock":true},{"title":"Black","offer_id":43785172910216,"sku":"","price":140.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/2116\/6472\/files\/copilot_grounded_1.webp?v=1750709867"},{"product_id":"nucleus-v3","title":"Nucleus ATAK MANET Radio","description":"\u003ch4\u003e\u003cstrong\u003ePlease note this is a made-to-order product — lead time typically 2–4 weeks.\u003c\/strong\u003e\u003c\/h4\u003e\n\n\u003chr\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eNucleus from NATAK Mesh\u003c\/strong\u003e is built to be the communications core of your off-grid network. It combines long-range LoRa radio, high-speed WiFi mesh, and the processing power of a Raspberry Pi 4 in a single compact unit — giving you a platform that keeps your team connected and data moving when normal infrastructure isn't an option.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's new in V3:\u003c\/strong\u003e the LoRa radio jumps to a full \u003cstrong\u003e1 watt (1,000 mW)\u003c\/strong\u003e — a real output increase over the outgoing 159 mW unit. A new \u003cstrong\u003e3D-printed enclosure\u003c\/strong\u003e that improves durability. The \u003cstrong\u003eUSB-C port\u003c\/strong\u003e now supports the \u003cstrong\u003eBifrost USB-C PTT\u003c\/strong\u003e (sold separately) for direct hardware push-to-talk, and doubles as general I\/O for whatever ships next. Onboard software still makes ATAK integration completely seamless — connect to the Nucleus and ATAK automatically uses both radios, no plugins, no configuration. Toggle the LoRa bridge off anytime to run it as a standard Meshtastic node.\u003c\/p\u003e\n\u003cp\u003eBeyond TAK, the Nucleus opens the door to building your own private IP network — one you own and control. With \u003cstrong\u003eTailscale\u003c\/strong\u003e you can bridge nodes securely across existing internet infrastructure for remote access and management. \u003cstrong\u003eReticulum\u003c\/strong\u003e enables encrypted, infrastructure-independent mesh networking. Add \u003cstrong\u003eJami\u003c\/strong\u003e and you get voice calls, text, and video over your mesh — services that look and feel normal, running entirely on hardware you control. This is a capable, expandable communications platform, not just a radio.\u003c\/p\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003e\u003cstrong\u003eWhy We Love It\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eActs as a central hub for LoRa and WiFi mesh communications\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eZero-touch ATAK integration\u003c\/strong\u003e — connect to the node and both radios work automatically, no plugins required\u003c\/li\u003e\n\u003cli\u003eRuns \u003cstrong\u003eMeshtastic\u003c\/strong\u003e — the primary long-range protocol — with Reticulum available for infrastructure-independent mesh; toggle bridge mode on or off anytime\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiFi mesh up to 6,000x faster\u003c\/strong\u003e than LoRa for ATAK, voice, photo, and video data\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull 1-watt LoRa radio (1,000 mW)\u003c\/strong\u003e — NATAK's most powerful LoRa output yet. Held a link past 22 miles with elevation before this power increase; a conservative range estimate now.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB-C port supports the Bifrost USB-C PTT\u003c\/strong\u003e (sold separately) for direct hardware push-to-talk — the same port also works as generic I\/O for other USB-C accessories\u003c\/li\u003e\n\u003cli\u003eOnboard \u003cstrong\u003eRaspberry Pi 4 running OpenTAKServer\u003c\/strong\u003e for seamless team sync\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTailscale integration\u003c\/strong\u003e enables secure remote access and over-the-air updates from anywhere with internet\u003c\/li\u003e\n\u003cli\u003eSupports private IP networking via Reticulum and Jami for voice, text, and video over mesh\u003c\/li\u003e\n\u003cli\u003eBuilt from modular, off-the-shelf parts — easy to replace, repair, and customize\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is this thing?\u003c\/strong\u003e\u003cbr\u003eTwo radios and a server in one. The Nucleus combines a LoRa radio for long-range, low-bandwidth communications (text and map markers) with a high-speed WiFi mesh router capable of voice, photos, and video at intermediate ranges. The onboard Raspberry Pi 4 runs OpenTAKServer — an open-source TAK server that keeps your entire team synced without touching a cell tower.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCan I use a push-to-talk (PTT) accessory with the Nucleus?\u003c\/strong\u003e\u003cbr\u003eYes — the Nucleus supports the Bifrost USB-C PTT (sold separately) through its USB-C port for direct, hardware push-to-talk.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat's the USB-C port for?\u003c\/strong\u003e\u003cbr\u003eIt's a generic I\/O port. Today that means the Bifrost PTT accessory; more USB-C accessories are on NATAK's roadmap.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat does \"zero-touch ATAK integration\" mean?\u003c\/strong\u003e\u003cbr\u003eThe Nucleus ships with a software bridge that connects the Meshtastic LoRa radio directly to ATAK. When the bridge is enabled, you just connect your device to the Nucleus and ATAK automatically uses both radios. No plugins to install, no manual pairing. Want to use it as a standard Meshtastic node? Turn the bridge off — it's a single toggle.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDo I need the Meshtastic ATAK plugin?\u003c\/strong\u003e\u003cbr\u003eNo. The Nucleus connects to ATAK natively over WiFi mesh, with a built-in LoRa bridge for range. No plugins necessary. Users may choose to use the Meshtastic plugin for greater compatibility with other Meshtastic nodes — but this is not required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat kind of range does this radio get?\u003c\/strong\u003e\u003cbr\u003eLoRa mesh: up to 22 miles held with elevation in NATAK's longest field test, 8 miles held on a secondary elevation test — maximum range not yet established. WiFi mesh: up to 5 km with 50m of elevation and clear line of sight, 1 km at ground level, dropping to roughly 100m through heavy obstruction or dense tree cover. As always, mesh range scales with node density more than the power of any single unit — more nodes extend coverage further than a stronger radio on one node.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHow do I connect to it?\u003c\/strong\u003e\u003cbr\u003eConnect to the WiFi network like any router. ATAK connects automatically when the bridge is enabled. For standard Meshtastic use, connect via Bluetooth. The LoRa firmware can also be flashed to Reticulum if preferred.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIs there an internal battery?\u003c\/strong\u003e\u003cbr\u003eNo. Any USB-A power bank will run it for hours. For ~24 hours of continuous use, \u003ca href=\"https:\/\/amzn.to\/49CXpWj\" target=\"_blank\" rel=\"noopener\"\u003ethis power bank has been tested and works well.\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCan I connect multiple phones to one Nucleus?\u003c\/strong\u003e\u003cbr\u003eYes, with some caveats: range will be limited to 10–20m from the node, and only one user can connect to the LoRa radio at a time. Mesh networks work best with one node per person or team. If budget is tight, one node per team is a workable starting point.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHow many nodes should I get?\u003c\/strong\u003e\u003cbr\u003eWe recommend starting with 2–3 nodes at minimum — the high-speed WiFi mesh capability really comes into its own when you have multiple nodes in range of each other. Additional nodes can be added to your mesh later, and NATAK can push remote updates via Tailscale, so you're never locked into buying everything at once.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDo I need TAK Server on all nodes?\u003c\/strong\u003e\u003cbr\u003eNo. OpenTAKServer doesn't support federation (meaning you don't need multiple servers — one is the source of truth for the whole network). Future versions may support federated servers and can be updated later.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCan I configure TAK Server myself?\u003c\/strong\u003e\u003cbr\u003eYes. Every node ships ready for self-configuration if you'd prefer to save on the setup fee.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat version of TAK Server is included?\u003c\/strong\u003e\u003cbr\u003eLatest \u003cstrong\u003eOpenTAKServer\u003c\/strong\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003e\u003cstrong\u003eTechnical Specs\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoRa Radio:\u003c\/strong\u003e RAK4631 module on a Raspberry Pi HAT (GPIO-connected) — 915 MHz, SF7, 250 kHz bandwidth, 1,000 mW (1W) output. Meshtastic primary; Reticulum available.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiFi Mesh:\u003c\/strong\u003e 802.11s via Alfa external card, Batman routing protocol — 2.4 GHz, 500 mW conducted\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProcessor:\u003c\/strong\u003e Raspberry Pi 4, Raspberry Pi OS (OpenTAKServer + MediaMTX pre-installed on configured option)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB-C:\u003c\/strong\u003e USB 2.0, generic I\/O — supports Bifrost USB-C PTT (sold separately)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEthernet:\u003c\/strong\u003e 10\/100\/1000 Mbps, RJ45\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAntennas:\u003c\/strong\u003e WiFi 5 dBi, LoRa 5 dBi, RP-SMA connectors\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEncryption:\u003c\/strong\u003e AES-256 for LoRa, WPA3 for 802.11\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure:\u003c\/strong\u003e 3D-printed, improved durability\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e 5V DC, 0.6A avg, ~3W typical, external battery required (not included)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Natak Mesh","offers":[{"title":"No TAK Server","offer_id":44203187732616,"sku":null,"price":600.0,"currency_code":"USD","in_stock":true},{"title":"TAK Server Configured","offer_id":44203187765384,"sku":null,"price":700.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/2116\/6472\/files\/NTK_NucleusV3_01_standalone.jpg?v=1788195971"},{"product_id":"rm-2-ruggedized-mesh-radio","title":"RM-2 Ruggedized Mesh Radio","description":"\u003cdiv class=\"rm2\"\u003e\n\u003cp class=\"rm2-lead\"\u003eThe RM-2 is AT-Labs' flagship mesh radio. It runs 2W where the RM-1 runs 1W and has a new American-made LoRa board, all in the same aluminum housing that fits a standard radio pouch. \u003cstrong\u003ePortable from $795. Infrastructure $895.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"rm2-strip\"\u003e\n\u003cli\u003e\n\u003cspan\u003eShips with\u003c\/span\u003e RC-2 Quick Charge Adapter\u003cbr\u003eAll antennas and a waterproof USB-C cable for connecting straight to your phone\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eLead time\u003c\/span\u003e Built to order by AT-Labs\u003cbr\u003eShips in about 8 weeks\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eBulk or international\u003c\/span\u003e \u003ca href=\"mailto:sales@constellationresponse.com\"\u003esales@constellationresponse.com\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdetails class=\"rm2-sec\" open=\"\"\u003e\n\u003csummary\u003eWhy the RM-2\u003c\/summary\u003e\n\u003cdiv class=\"rm2-body\"\u003e\n\u003cul class=\"rm2-list\"\u003e\n\u003cli\u003e\n\u003cstrong\u003e2 watts of transmit power.\u003c\/strong\u003e Double the RM-1's output, for more signal headroom through terrain, timber, and noisy RF. When the repeater doesn't reach the canyon floor, the RM-2 gives you more to work with.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt to take a beating.\u003c\/strong\u003e Extruded-aluminum housing, rubber shock bumpers at both ends, sealed waterproof USB-C, and a durable gooseneck antenna. IP-68 \/ MIL-STD-810H (certification pending).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBest-in-class antennas.\u003c\/strong\u003e An active helical GNSS antenna for precise location fixing in any orientation, and a custom-tuned LoRa antenna for high performance and pristine signal quality.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmerican-made LoRa board.\u003c\/strong\u003e A new U.S.-manufactured PCB designed by AT-Labs, built around the Ebyte E22-900M33S module. Designed and assembled in the U.S.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits your team's kit.\u003c\/strong\u003e Same size as the RM-1, works with every RM-1 accessory, and runs on the same mesh as your RM-1s and standard Meshtastic channels. Runs Meshtastic, MeshCore, or Reticulum with no subscription.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFirmware that is easy to find and manage.\u003c\/strong\u003e Every RM-2 ships with AT-Labs firmware loaded and transmit power already set. Builds and updates live on the AT-Labs firmware site.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBuilt for SAR teams, field medics, community responders, and civilians who expect their gear to work when everything else fails. The RM-2 fits the team whose last training op hit a dead zone and needs more power per node.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003cdetails class=\"rm2-sec\" open=\"\"\u003e\n\u003csummary\u003ePortable or Infrastructure\u003c\/summary\u003e\n\u003cdiv class=\"rm2-body\"\u003e\n\u003cdiv class=\"rm2-cards\"\u003e\n\u003cdiv class=\"rm2-card\"\u003e\n\u003ch3\u003ePortable\u003c\/h3\u003e\n\u003cp class=\"rm2-price\"\u003e$795\u003c\/p\u003e\n\u003cp\u003eWorn or carried by individuals in the field. Fits a standard radio pouch.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"rm2-card\"\u003e\n\u003ch3\u003eInfrastructure\u003c\/h3\u003e\n\u003cp class=\"rm2-price\"\u003e$895\u003c\/p\u003e\n\u003cp\u003eA fixed repeater with mounting brackets and a solar panel, built to run unattended and extend your team's coverage from high ground.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003eMost teams start with a mix: portables for personnel, infrastructure for fixed high points.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003cdetails class=\"rm2-sec\" open=\"\"\u003e\n\u003csummary\u003eFrom the field\u003c\/summary\u003e\n\u003cdiv class=\"rm2-body\"\u003e\n\u003cdiv class=\"rm2-video\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/JlR5r7N0ifs\" title=\"District47: AT-Labs RM-2 review\" loading=\"lazy\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003cdiv class=\"rm2-quote\"\u003e\n\u003cp\u003e\"This thing punches through RF when nothing else will. Some say higher power defeats the purpose of Meshtastic — but in RF-dense environments, you need it. The RM-2 lets me hit an antenna site flooded with 900MHz noise and still cut through the noise. This thing's awesome.\"\u003c\/p\u003e\n\u003cp class=\"rm2-cite\"\u003eMichael T., Verified Buyer\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"rm2-quote\"\u003e\n\u003cp\u003e\"If you're considering an RM-2, you're getting a thoughtfully built American-made product and a team that genuinely stands behind it.\"\u003c\/p\u003e\n\u003cp class=\"rm2-cite\"\u003eCY, Verified Buyer\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003cdetails class=\"rm2-sec\" open=\"\"\u003e\n\u003csummary\u003eSetting up your RM-2\u003c\/summary\u003e\n\u003cdiv class=\"rm2-body\"\u003e\n\u003cp\u003eEvery RM-2 ships with AT-Labs firmware already loaded and transmit power already set. Getting on the mesh takes three steps.\u003c\/p\u003e\n\u003col class=\"rm2-steps\"\u003e\n\u003cli\u003e\u003cstrong\u003eAttach the antennas.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTurn on the radio.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePair with your phone.\u003c\/strong\u003e Use the Meshtastic app. You're ready to go.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3 class=\"rm2-sub\"\u003eUpdating the firmware\u003c\/h3\u003e\n\u003cp\u003eWhen an update is due, follow our step-by-step guide: \u003ca href=\"https:\/\/constellationresponse.com\/blogs\/news\/how-to-update-the-firmware-on-your-meshtastic-radio\"\u003eHow to update the firmware on your Meshtastic radio\u003c\/a\u003e. AT-Labs builds for Meshtastic, MeshCore, and Reticulum are at \u003ca href=\"https:\/\/firmware.at-labs.tech\/\" rel=\"noopener\" target=\"_blank\"\u003efirmware.at-labs.tech\u003c\/a\u003e. Flash over USB, since the aluminum housing blocks Bluetooth too much for a reliable update.\u003c\/p\u003e\n\u003cdiv class=\"rm2-note\"\u003e\n\u003cstrong\u003eKeep TX power at 8 or below.\u003c\/strong\u003e If you ever flash stock firmware or reset the radio, set LoRa TX power to 8 before you set the region. Settings above 8 permanently damage the radio module and are not covered by warranty. The AT-Labs firmware holds this setting for you, so if you stay on it there is nothing to manage.\u003c\/div\u003e\n\u003cp\u003eEvery RM-2 is covered by AT-Labs' 1-year warranty.\u003c\/p\u003e\n\u003cp class=\"rm2-fine\"\u003eThe RM-2 is a Part 97 device. Operators are responsible for running it within the laws of their region.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003cdetails class=\"rm2-sec\" open=\"\"\u003e\n\u003csummary\u003eWhen to choose the RM-2\u003c\/summary\u003e\n\u003cdiv class=\"rm2-body\"\u003e\n\u003cp\u003eIf you work somewhere you have to be sure your signal gets through, the RM-2 is the node for you. The extra power gives your signal its best chance to get out. That is what the 2W buys you.\u003c\/p\u003e\n\u003cp\u003eIt runs on the same mesh as the RM-1 and standard Meshtastic channels, so it drops into a team that already has radios in the field.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003cdetails class=\"rm2-sec\"\u003e\n\u003csummary\u003eTechnical specs\u003c\/summary\u003e\n\u003cdiv class=\"rm2-body\"\u003e\n\u003cdiv\u003ePower output2 W, fixed\u003c\/div\u003e\n\u003cdiv\u003eFrequency band868\/915 MHz ISM band (LoRa \/ Meshtastic)\u003c\/div\u003e\n\u003cdiv\u003eCompatibilityBackward-compatible with RM-1 and standard Meshtastic channels\u003c\/div\u003e\n\u003cdiv\u003eChipsetEbyte E22-900M33S, Seeed Studio Xiao nRF52 kit, U.S.-manufactured PCB\u003c\/div\u003e\n\u003cdiv\u003eBattery10 Ah Li-ion internal. Days of operation per charge\u003c\/div\u003e\n\u003cdiv\u003eChargingRC-2 Quick Charge Adapter included (about 3 hr full charge; 12V DC input)\u003c\/div\u003e\n\u003cdiv\u003eEnclosureExtruded aluminum with rubber shock bumpers\u003c\/div\u003e\n\u003cdiv\u003eIngress protectionIP-68 \/ MIL-STD-810H (pending certification)\u003c\/div\u003e\n\u003cdiv\u003eAntennaCustom-tuned LoRa antenna for high performance and pristine signal quality. Active helical GNSS antenna for precise location fixing in any orientation\u003c\/div\u003e\n\u003cdiv\u003eI\/OWaterproof USB-C (charging and data). Pogo port for cradle charging, power indicator, RX indicator\u003c\/div\u003e\n\u003cdiv\u003eControlsPower button, reset button\u003c\/div\u003e\n\u003cdiv\u003eDimensionsSame as RM-1 portable. All RM-1 accessories fully compatible\u003c\/div\u003e\n\u003cdiv\u003eSoftwareMeshtastic, MeshCore, Reticulum (\u003ca href=\"https:\/\/firmware.at-labs.tech\/\" rel=\"noopener\" target=\"_blank\"\u003eAT-Labs firmware\u003c\/a\u003e recommended)\u003c\/div\u003e\n\u003cdiv\u003eCountries of originU.S.A., China, Taiwan, Japan\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003cdetails class=\"rm2-sec\"\u003e\n\u003csummary\u003eFAQ\u003c\/summary\u003e\n\u003cdiv class=\"rm2-body\"\u003e\n\u003cdetails class=\"rm2-q\"\u003e\n\u003csummary\u003eWhat's the difference between the RM-1 and RM-2?\u003c\/summary\u003e\n\u003cp\u003eThe RM-2 is AT-Labs' flagship. It has the same housing, battery class, and accessories as the RM-1, plus double the transmit power (2W vs 1W), a new American-made LoRa PCB, IP-68 sealing (certification pending), and the RC-2 charger with 12V DC input. Both run on the same mesh.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails class=\"rm2-q\"\u003e\n\u003csummary\u003eWhy does the RM-2 cost so much?\u003c\/summary\u003e\n\u003cp\u003eEvery part in the RM-2 is the best available on the market, and the whole radio is custom built for first responders and search and rescue. Nothing was cut to hit a price point. Portable is $795 and Infrastructure is $895, and each ships with the RC-2 Quick Charge Adapter.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails class=\"rm2-q\"\u003e\n\u003csummary\u003ePortable or Infrastructure: which one do I need?\u003c\/summary\u003e\n\u003cp\u003ePortable is worn or carried and built for individual field use. Infrastructure is a fixed repeater with mounting brackets and a solar panel, meant to run unattended and extend your team's coverage. Most teams start with a mix: portables for personnel, infrastructure for fixed high points.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails class=\"rm2-q\"\u003e\n\u003csummary\u003eWhat's in the box?\u003c\/summary\u003e\n\u003cp\u003eThe RM-2 radio, RC-2 charger, GNSS antenna, custom-tuned LoRa antenna, and a waterproof USB-C cable.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails class=\"rm2-q\"\u003e\n\u003csummary\u003eDoes the RM-2 handle video?\u003c\/summary\u003e\n\u003cp\u003eNo. The RM-2 isn't a video platform. Text and GPS come first. If your team needs video over mesh, look at \u003ca href=\"https:\/\/constellationresponse.com\/products\/nucleus-v3\"\u003eNATAK Mesh's Nucleus\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails class=\"rm2-q\"\u003e\n\u003csummary\u003eWill the RM-2 work with my RM-1s?\u003c\/summary\u003e\n\u003cp\u003eYes. It's backward-compatible with RM-1 nodes and standard Meshtastic channels as long as both run the same core firmware, and every RM-1 accessory fits.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails class=\"rm2-q\"\u003e\n\u003csummary\u003eCan I upgrade my RM-1 to an RM-2?\u003c\/summary\u003e\n\u003cp\u003eNo. The RM-2 uses a different radio module, so it isn't a firmware unlock. Your RM-1 accessories all carry over to a new RM-2.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails class=\"rm2-q\"\u003e\n\u003csummary\u003eIs there a pouch for the RM-2?\u003c\/summary\u003e\n\u003cp\u003eYes. We recommend the \u003ca href=\"https:\/\/constellationresponse.com\/products\/ruggedized-radio-pouch\"\u003eSX-E Radio Pouch\u003c\/a\u003e, custom built for the RM family of radios. A standard tactical radio pouch works too.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails class=\"rm2-q\"\u003e\n\u003csummary\u003eIs this the right radio for a SAR team?\u003c\/summary\u003e\n\u003cp\u003eYes, when you need a pouch-compatible mesh node with days of battery, open firmware (Meshtastic \/ MeshCore \/ Reticulum), and more power per node, on U.S.-assembled hardware you can hand to volunteers with no subscription.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails class=\"rm2-q\"\u003e\n\u003csummary\u003eHow is this different from a $30 Meshtastic board?\u003c\/summary\u003e\n\u003cp\u003eA $30 board is a starter node. These are duty radios: a custom-built board, an aluminum housing that fits standard radio pouches, a ~10 Ah battery for multi-day missions, and an ~8-week made-to-order build. Same open mesh idea, different job.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails class=\"rm2-q\"\u003e\n\u003csummary\u003eHow long until it ships?\u003c\/summary\u003e\n\u003cp\u003eEach RM-2 is built to order by AT-Labs and ships in about 8 weeks. For bulk or international orders, email \u003ca href=\"mailto:sales@constellationresponse.com\"\u003esales@constellationresponse.com\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003c\/div\u003e\n\u003cstyle\u003e\n.rm2{font-family:\"Rubik\",-apple-system,\"Segoe UI\",Helvetica,Arial,sans-serif;color:inherit;--a:#9cae8e;--line:color-mix(in srgb,currentColor 18%,transparent);--soft:color-mix(in srgb,currentColor 6%,transparent);font-size:16px;line-height:1.6;max-width:760px}\n.rm2 *{box-sizing:border-box}\n.rm2 p{margin:0 0 1em}\n.rm2 a{color:inherit;text-decoration:underline;text-underline-offset:3px}\n.rm2 a:hover{color:var(--a)}\n.rm2-lead{font-size:1.1em;line-height:1.55;margin-bottom:1.25em!important}\n.rm2-strip{list-style:none;margin:0 0 32px;padding:0;display:grid;grid-template-columns:repeat(3,1fr);border:1px solid var(--line)}\n.rm2-strip li{padding:14.4px 16px;font-size:.88em;line-height:1.45;border-left:1px solid var(--line)}\n.rm2-strip li:first-child{border-left:0}\n.rm2-strip span{display:block;font-family:\"Oswald\",\"Arial Narrow\",Impact,sans-serif;font-size:12.48px;letter-spacing:.12em;text-transform:uppercase;color:var(--a);margin-bottom:4.8px}\n.rm2-sec{border-top:1px solid var(--line)}\n.rm2-sec:last-of-type{border-bottom:1px solid var(--line)}\n.rm2-sec\u003esummary,.rm2-q\u003esummary{list-style:none;cursor:pointer;position:relative}\n.rm2-sec\u003esummary::-webkit-details-marker,.rm2-q\u003esummary::-webkit-details-marker{display:none}\n.rm2-sec\u003esummary{font-family:\"Oswald\",\"Arial Narrow\",Impact,sans-serif;font-weight:500;font-size:20px;letter-spacing:.06em;text-transform:uppercase;padding:17.6px 40px 17.6px 0;line-height:1.2}\n.rm2-sec\u003esummary::after,.rm2-q\u003esummary::after{content:\"+\";position:absolute;right:4px;top:50%;transform:translateY(-50%);font-family:\"Oswald\",\"Arial Narrow\",Impact,sans-serif;font-size:24px;font-weight:300;color:var(--a);transition:transform .2s}\n.rm2-sec[open]\u003esummary::after,.rm2-q[open]\u003esummary::after{content:\"\\2212\"}\n.rm2-sec\u003esummary:focus-visible,.rm2-q\u003esummary:focus-visible{outline:2px solid var(--a);outline-offset:2px}\n.rm2-body{padding:0 0 24px}\n.rm2-list,.rm2-steps{margin:0 0 20px;padding:0;list-style:none}\n.rm2-list li{position:relative;padding:1.6px 0 14.4px 22.4px}\n.rm2-list li::before{content:\"\";position:absolute;left:0;top:.7em;width:8.8px;height:2px;background:var(--a)}\n.rm2-steps{counter-reset:s}\n.rm2-steps li{counter-increment:s;position:relative;padding:0 0 16px 41.6px}\n.rm2-steps li::before{content:counter(s);position:absolute;left:0;top:0.8px;width:28.8px;height:28.8px;border:1px solid var(--a);color:var(--a);font-family:\"Oswald\",\"Arial Narrow\",Impact,sans-serif;font-size:15.2px;line-height:27.2px;text-align:center}\n.rm2-cards{display:grid;grid-template-columns:1fr 1fr;gap:16px;margin:0 0 16px}\n.rm2-card{border:1px solid var(--line);background:var(--soft);padding:17.6px 19.2px}\n.rm2-card h3{font-family:\"Oswald\",\"Arial Narrow\",Impact,sans-serif;font-size:17.6px!important;letter-spacing:.08em;text-transform:uppercase;margin:0 0 3.2px;line-height:1.2}\n.rm2-card p{margin:0;font-size:.92em}\n.rm2-card .rm2-price{font-family:\"Oswald\",\"Arial Narrow\",Impact,sans-serif;font-size:25.6px;color:var(--a);margin:0 0 8px;line-height:1.2}\n.rm2-video{position:relative;aspect-ratio:16\/9;margin:0 0 20px;background:#000}\n.rm2-video iframe{position:absolute;inset:0;width:100%;height:100%;border:0}\n.rm2-quote{border-left:3px solid var(--a);padding:3.2px 0 1.6px 17.6px;margin:0 0 24px}\n.rm2-quote p{font-family:Georgia,\"Times New Roman\",serif;font-size:1.08em;font-style:italic;line-height:1.55;margin:0 0 9.6px}\n.rm2-quote .rm2-cite{font-style:normal;font-family:\"Oswald\",\"Arial Narrow\",Impact,sans-serif;font-size:13.6px;letter-spacing:.12em;text-transform:uppercase;color:var(--a);margin:0}\n.rm2-note{border:1px solid var(--line);border-left:3px solid var(--a);background:var(--soft);padding:14.4px 17.6px;margin:0 0 17.6px;font-size:.94em}\n.rm2-sub{font-family:\"Oswald\",\"Arial Narrow\",Impact,sans-serif;font-weight:500;font-size:16px!important;letter-spacing:.1em;text-transform:uppercase;margin:24px 0 9.6px;color:var(--a)}\n.rm2-fine{font-size:.86em;opacity:.75;margin:0}\n.rm2-specs{margin:0;display:block}\n.rm2-specs\u003ediv{display:grid;grid-template-columns:176px 1fr;gap:16px;padding:11.2px 0;border-top:1px solid var(--line)}\n.rm2-specs\u003ediv:first-child{border-top:0}\n.rm2-specs dt{font-family:\"Oswald\",\"Arial Narrow\",Impact,sans-serif;font-size:13.12px;letter-spacing:.1em;text-transform:uppercase;color:var(--a);padding-top:2.4px}\n.rm2-specs dd{margin:0;font-size:.94em}\n.rm2-q{border-top:1px solid var(--line)}\n.rm2-q:first-child{border-top:0}\n.rm2-q\u003esummary{font-weight:600;padding:14.4px 35.2px 14.4px 0;line-height:1.4}\n.rm2-q\u003esummary::after{font-size:20px}\n.rm2-q p{margin:0 0 16px;font-size:.95em}\n@media(max-width:640px){\n.rm2-strip{grid-template-columns:1fr}\n.rm2-strip li{border-left:0;border-top:1px solid var(--line)}\n.rm2-strip li:first-child{border-top:0}\n.rm2-cards{grid-template-columns:1fr}\n.rm2-specs\u003ediv{grid-template-columns:1fr;gap:1.6px}\n.rm2-sec\u003esummary{font-size:17.6px}\n}\n\u003c\/style\u003e","brand":"AT-Labs","offers":[{"title":"Portable","offer_id":44429156024456,"sku":null,"price":795.0,"currency_code":"USD","in_stock":true},{"title":"Infrastructure","offer_id":44429156057224,"sku":null,"price":895.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/2116\/6472\/files\/619554553_3287003574802188_5650782479903261672_n.jpg?v=1770653170"},{"product_id":"rc-series","title":"RC-1\/2 Rapid Charger","description":"\u003cp\u003e\u003cstrong\u003eMade to order — ships in about 1 week.\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch4\u003eCharging an RM-2 over USB-C used to take 10–12 hours for a full charge. The RC Series cuts that to about 3 hours.\u003c\/h4\u003e\n\u003ch4\u003eBoth versions connect the same way: set the adapter against the pogo pin on the bottom of your RM-1 or RM-2 and the magnet pulls it into place.\u003c\/h4\u003e\n\u003chr\u003e\n\u003ch4\u003eBoth RC-1 and RC-2 use the same magnetic pogo-pin connection. Both ship with a 12V 2A (24W) wall adapter and roughly 36 inches of cable. The difference is what you're allowed to plug into.\u003c\/h4\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0615\/2116\/6472\/files\/Shopify_RC-1.png?v=1785893212\" alt=\"\"\u003e\u003c\/p\u003e\n\u003ch4\u003e\n\u003cstrong\u003eRC-1\u003c\/strong\u003e is a sealed run: wall adapter straight to the pogo connector. Plug it in, charge, done. That's the right pick if your radios live at a desk, a base station, or a vehicle you can shore-power.\u003c\/h4\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0615\/2116\/6472\/files\/Shopify_RC-2.png?v=1785893212\" alt=\"\"\u003e\u003c\/p\u003e\n\u003ch4\u003e\n\u003cstrong\u003eRC-2\u003c\/strong\u003e breaks that run with a center-pin-positive 5.5 mm × 2.1 mm barrel connector. It still comes with the same 12V 2A wall adapter, so it works exactly like an RC-1 at base — but you can unplug that adapter and feed it from a solar panel, a vehicle charger, a power station, or any in-spec 12V DC source instead. That's the option for teams that can't count on an outlet: SAR, disaster relief, anyone working off-grid.\u003c\/h4\u003e\n\u003chr\u003e\n\u003ch3\u003e\u003cstrong\u003eWhy We Love It\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSnaps right in.\u003c\/strong\u003e The magnetic pogo-pin connection is super satisfying — you'll feel it seat correctly every time.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRC-2 doesn't cost you the outlet.\u003c\/strong\u003e It ships with the wall adapter too. The barrel jack is an addition, not a trade — base charging today, solar or vehicle power the day the grid isn't there.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBring your own power.\u003c\/strong\u003e Any 12V DC source with a matching 5.5 mm × 2.1 mm barrel works. You aren't locked to our adapter.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003e\u003cstrong\u003eTechnical Specs\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch4\u003eWhat's in the Box\u003c\/h4\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eRC-1\u003c\/td\u003e\n\u003ctd\u003e12V 2A (24W) wall adapter wired directly to the magnetic pogo connector. Approx. 36\" total length.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRC-2\u003c\/td\u003e\n\u003ctd\u003eMagnetic pogo connector with a center-pin-positive 5.5 mm × 2.1 mm barrel input, plus a matching 12V 2A (24W) wall adapter. Approx. 36\" total length.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eNot included:\u003c\/strong\u003e radios, solar panels, vehicle chargers, and power stations are sold separately. Product photos show the RC-2 connected to a solar panel to demonstrate its 12V DC input — the panel is not part of this listing.\u003c\/p\u003e\n\u003ch4\u003eSpecs\u003c\/h4\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnection to radio\u003c\/td\u003e\n\u003ctd\u003eMagnetic pogo-pin (RC-1 and RC-2)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Input — RC-1\u003c\/td\u003e\n\u003ctd\u003eStandard AC wall outlet (included adapter)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Input — RC-2\u003c\/td\u003e\n\u003ctd\u003e12V DC via 5.5 mm × 2.1 mm barrel, center pin positive. Included wall adapter, or any in-spec 12V DC source (solar, vehicle, power station).\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIncluded Adapter\u003c\/td\u003e\n\u003ctd\u003e12V 2A (24W), 100–240V AC input — both RC-1 and RC-2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable Length\u003c\/td\u003e\n\u003ctd\u003eApprox. 36\" (both models)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eRadios\u003c\/td\u003e\n\u003ctd\u003eRM-1 and RM-2 units shipped Q2 2026 or later. Earlier units lack the required charging contacts and are not compatible.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eQuestions\u003c\/td\u003e\n\u003ctd\u003eEmail sales@constellationresponse.com to confirm compatibility before ordering.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4\u003eBuild\u003c\/h4\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eAT Labs — Tennessee, U.S.A.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLead\u003c\/td\u003e\n\u003ctd\u003eapprox. 1 week\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eSafety notice:\u003c\/strong\u003e Charging while wet is dangerous and voids the warranty. Confirm the radio's charging contacts and the adapter are completely dry before connecting. Constellation Response is not responsible for damage, injury, or warranty claims resulting from charging a wet unit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRC-2 power source notice:\u003c\/strong\u003e Feeding the RC-2 from an out-of-spec source — wrong voltage, reversed polarity, or an unregulated supply — can damage your radio and voids the warranty. Confirm 12V DC and center-pin-positive polarity before connecting anything other than the included adapter.\u003c\/p\u003e","brand":"AT-Labs","offers":[{"title":"RC-1 — Wall Adapter","offer_id":46149097816200,"sku":null,"price":60.0,"currency_code":"USD","in_stock":true},{"title":"RC-2 — Barrel Jack (12V DC)","offer_id":46149097848968,"sku":null,"price":75.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/2116\/6472\/files\/RC-1_4.jpg?v=1785359088"},{"product_id":"ion-tak-server","title":"Ion — TAK Server","description":"\u003ch4\u003e\u003cstrong\u003eMade to order — contact for production lead time\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eIon is built by NATAK Mesh on confirmed order. Typically around 2–4 week estimate. For agency volume, bulk orders, or questions about which server option fits your team, contact \u003cstrong\u003esales@constellationresponse.com\u003c\/strong\u003e.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eIon is a standalone TAK Server appliance — no radios, no mesh. Plug it into whatever connectivity you already have (WiFi grid, cellular, Starlink) and you've got a private TAK server your team owns and controls. Built for a team-lead, FOB, or base-station role, not something you wear.\u003c\/p\u003e\n\u003cp\u003eThe Ion has more processing power than most out-of-the-box TAK server options, many of which run on a Raspberry Pi at a higher price — with your choice of Official TAK Server or Open TAK Server. Open TAK Server: simpler account creation, setup NATAK already has documented. Official TAK Server is a more advanced option for groups wanting to run multiple federated servers. A custom NATAK Mesh front-end makes the official server easier to manage than the command-line setup a DIY install would require.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eWhat's included\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eIncludes the mini PC, power supply, WiFi access point, and Tailscale pre-installed. No radios, no mesh hardware — if you need field-deployed or on-body comms, see Nucleus instead.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003e\u003cstrong\u003eWhy We Love It\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNATAK's management software up front.\u003c\/strong\u003e Create accounts and manage the server without touching the command line — most DIY TAK Server installs don't give you that.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOfficial or Open TAK Server — your choice.\u003c\/strong\u003e Pick the one that fits your team at checkout. Same hardware either way.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMore power than most out-of-the-box TAK servers.\u003c\/strong\u003e Many run on a Raspberry Pi and cost more than Ion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFederation-ready.\u003c\/strong\u003e Official TAK Server supports linking multiple servers together across teams or locations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTailscale included.\u003c\/strong\u003e Remote access and updates, out of the box.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDo I need a Nucleus too?\u003c\/strong\u003e\u003cbr\u003eNo. Ion is a standalone TAK server — it runs independent of any field radios. Pair it with Nucleus if you want the mesh-plus-server combo, but it's not required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOfficial TAK Server or Open TAK Server — which do I pick?\u003c\/strong\u003e\u003cbr\u003eOpen TAK Server is simpler to set up — NATAK already has the documentation, and it's the right call for most single-server teams. Official TAK Server is built for teams running multiple federated servers across locations. Same hardware, same price — your choice at checkout.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat connectivity does Ion use?\u003c\/strong\u003e\u003cbr\u003eNo onboard radio. Plug it into whatever connectivity you already have — WiFi, cellular, Starlink — and it runs your private TAK server on that.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCan I manage it without touching the command line?\u003c\/strong\u003e\u003cbr\u003eYes — NATAK's front-end handles account creation and server management. Most DIY TAK Server installs don't give you that.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003e\u003cstrong\u003eTechnical Specs\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardware:\u003c\/strong\u003e Intel Core mini PC — exact model varies by availability; will meet or exceed requirements for the TAK Server\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eServer software:\u003c\/strong\u003e Official TAK Server or Open TAK Server (your choice, same price)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded:\u003c\/strong\u003e Mini PC, power supply, WiFi access point, Tailscale pre-installed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVendor:\u003c\/strong\u003e NATAK Mesh\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"NATAK Mesh","offers":[{"title":"Official TAK Server","offer_id":46239794593928,"sku":null,"price":500.0,"currency_code":"USD","in_stock":true},{"title":"Open TAK Server","offer_id":46239794626696,"sku":null,"price":500.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/2116\/6472\/files\/IMG_7822.jpg?v=1784916716"}],"url":"https:\/\/constellationresponse.com\/collections\/comms.oembed?page=2","provider":"Constellation Response","version":"1.0","type":"link"}